Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Navigator 5 cradle wire harness  (Read 243 times)

0 Members and 1 Guest are viewing this topic.

Online SwiftTone

  • XR Member
  • **
  • Posts: 18
  • Country: us
  • Town: Boston, MA
Navigator 5 cradle wire harness
« on: August 13, 2020, 02:54:05 PM »
Just mounted the cradle for the Navigator 5. There are 2 connectors. I was able to plug 1 of the connectors in and the Nav 5 seems to be functioning properly. So what is the 2nd plug for?

Also, can someone post up pictures of the routing for the wire coming off the cradle? I did the best I can but I would feel better if I had more slack.

Thanks!
« Last Edit: August 13, 2020, 02:57:24 PM by SwiftTone »

Offline Mareng1

  • XR God
  • *****
  • Posts: 1006
  • Country: gb
  • Bike: S1000XR
  • Town: Scotland
Re: Navigator 5 cradle wire harness
« Reply #1 on: August 13, 2020, 03:15:11 PM »
Second plug must be for the bike telemetry?    Not sure where it plugs into exactly.

When you fit your Nav and start the engine- is 'My bike' screen available on the Nav?  If not, then that is what the cable is for.

https://cdn.shopify.com/s/files/1/1066/1532/products/navi6_navivorb_11.jpg?v=1563985268
« Last Edit: August 13, 2020, 03:17:29 PM by Mareng1 »

Offline SimonUK

  • XR Master
  • ****
  • Posts: 621
  • Country: us
  • Bike: S1000XR,S1000R
  • Town: Upstate, SC
Re: Navigator 5 cradle wire harness
« Reply #2 on: August 13, 2020, 03:51:26 PM »
I only have one plugged in, Display & wonderwheel work fine, so not really sure what the other plug is for.

 



dysfunctional