Theme Select



Forum Default

Permanently

Author Topic: Lowered XR  (Read 1832 times)

0 Members and 1 Guest are viewing this topic.

#10

Offline LAMBO281

  • Ex Member
  • XR Master
  • *
  • Posts: 518
  • Country: gb
Re: Lowered XR
Reply #10 on: November 28, 2020, 08:05:21 PM
He does monitor this site and has put a few comments on before.

#11

Offline cymarcbikeparts

  • Approved Vendor
  • XR Member
  • *
  • Posts: 68
  • Bike: S1000XR
  • Town: SCUNTHORPE
  • Country: gb
Re: Lowered XR
Reply #11 on: November 30, 2020, 12:22:36 PM
Thanks for all the interest guys :028:

To answer the questions posed, our kit generally lowers the bike to a maximum of around 25mm. But few of our customers ever want this. We feel any lower than that and it could present a grounding possibility under certain conditions - remember, the S1000XR was never designed to ride as low as that!

We adjust the ride height of the front forks accordingly, but so as not to upset the bike's geometry and turn in, we lower it by only a small amount compared to the rear. Around 7.5mm at the front, we have worked out through many miles of testing, is what we believe to be the perfect measurement with our kit.

It isn't a cheap kit! But you do get what you pay for. We ahve this kit machined especially for us and it is made from extremely high grade stainless steel. We actually barely make anything from the sales and installation of it, that's how expensive it is!

But all those whom have had it fitted, it is well worth it for the difference, the feel, and the confidence it gives you!

If you or anyone are considering coming to visit us, if you could please do us the courtesy of giving us a quick call to arrange it first as we are extremely busy at this time bu of course are always more than happy to make time for visitors - if we know you're coming :002:

Give Mark a call on 07713789365 or drop him an email cymarcbikeparts@gmail.com to discuss a visit and details.

Cheers,
Mike.
Best regards,
Mike - Senior administrator, Cymarc Bike Parts
email - mick@cymarc.co.uk
Phone +44 7715 681911 Mon-Thurs 7-4, and Fri 7-1

#12

Offline yorkiebiker

  • XR Member
  • **
  • Posts: 16
  • Bike: S1000XR SPORTS S
  • Town: Leeds
  • Country: gb
Re: Lowered XR
Reply #12 on: November 30, 2020, 06:08:50 PM
*Originally Posted by cymarcbikeparts [+]
Thanks for all the interest guys :028:

To answer the questions posed, our kit generally lowers the bike to a maximum of around 25mm. But few of our customers ever want this. We feel any lower than that and it could present a grounding possibility under certain conditions - remember, the S1000XR was never designed to ride as low as that!

We adjust the ride height of the front forks accordingly, but so as not to upset the bike's geometry and turn in, we lower it by only a small amount compared to the rear. Around 7.5mm at the front, we have worked out through many miles of testing, is what we believe to be the perfect measurement with our kit.

It isn't a cheap kit! But you do get what you pay for. We ahve this kit machined especially for us and it is made from extremely high grade stainless steel. We actually barely make anything from the sales and installation of it, that's how expensive it is!

But all those whom have had it fitted, it is well worth it for the difference, the feel, and the confidence it gives you!

If you or anyone are considering coming to visit us, if you could please do us the courtesy of giving us a quick call to arrange it first as we are extremely busy at this time bu of course are always more than happy to make time for visitors - if we know you're coming :002:

Give Mark a call on 07713789365 or drop him an email cymarcbikeparts@gmail.com to discuss a visit and details.

Will defo be calling you Thanks for the info  :062: :062: :062:

Cheers,
Mike.
Live for today tomorrow may never come.

 



dysfunctional