Author Front mudguard extender on 2020 XR  (Read 1507 times)

0 Members and 1 Guest are viewing this topic.

  • Offline BeemerJoe   gb

    • XR Junior  ‐    9
    • *
    • Topic Author

    Offline BeemerJoe

    • XR Junior
    • *
    • Topic Author
    • Posts: 9
    • Bike: 2020 S 1000XR TE
    • Town: Great Plumpton
    • Country: gb
    Front mudguard extender on 2020 XR
    on: November 08, 2020, 03:55:17 pm
    November 08, 2020, 03:55:17 pm
    I have a factory lowered 2020 TE version and have heard that fitting an extender to front mudgiard might cause issues if hard braking is used due to more limited clearance between wheel and front end. Also I have carbon pack and mudguard looks very short so and looking to protect the water and oil cooler from stone damage etc. Fitting guards will reduce even further the clearance. Any thoughts?

  • Offline scotti   gb

    • XR Pro  ‐    122
    • ***
      #1

    Offline scotti

    • XR Pro
    • ***
    • Posts: 122
    • Bike: S1000XR TE 2020
    • Town: Teesside
    • Country: gb
    Re: Front mudguard extender on 2020 XR
    Reply #1 on: November 09, 2020, 09:24:50 am
    November 09, 2020, 09:24:50 am
    I've got the BMW radiator and oil cooler guards and a Pyramid Plastics fender extender on.  I've raised the forks through the clamps by 10mm and I've got no clearance problems.
    Regards
    Scotti

  • Offline BeemerJoe   gb

    • XR Junior  ‐    9
    • *
    • Topic Author
    • #2

    Offline BeemerJoe

    • XR Junior
    • *
    • Topic Author
    • Posts: 9
    • Bike: 2020 S 1000XR TE
    • Town: Great Plumpton
    • Country: gb
    Re: Front mudguard extender on 2020 XR
    Reply #2 on: November 09, 2020, 10:17:00 am
    November 09, 2020, 10:17:00 am
    Thanks for the information. I'll give this a go. :047:

     



    dysfunctional