Author Ventureshield  (Read 880 times)

0 Members and 1 Guest are viewing this topic.

  • Offline norskman   gb

    • XR Member  ‐    72
    • **
    • Topic Author

    Offline norskman

    • XR Member
    • **
    • Topic Author
    • Posts: 72
    • Bike: BMW S1000XR Red
    • Town: London, UK
    • Country: gb
    Ventureshield
    on: May 09, 2021, 06:12:19 pm
    May 09, 2021, 06:12:19 pm
    Can anyone recommend a good place that specialises in providing and fitting Ventureshield preferably in North London but could be further afield

    Many thanks

  • Online Mab1067   gb

    • XR Pro  ‐    209
    • ***
      #1

    Online Mab1067

    • XR Pro
    • ***
    • Posts: 209
    • Bike: 2020 S1000XR
    • Town: PETERHEAD
    • Country: gb
    Re: Ventureshield
    Reply #1 on: May 09, 2021, 07:13:57 pm
    May 09, 2021, 07:13:57 pm
    Invisible patterns supply full kit for £100.
    Dead easy to fit to be honest. Used them for the last 2 x K1300S and ST1050. Bit of soapy water and off you go. Simples  :152:

  • Offline norskman   gb

    • XR Member  ‐    72
    • **
    • Topic Author
    • #2

    Offline norskman

    • XR Member
    • **
    • Topic Author
    • Posts: 72
    • Bike: BMW S1000XR Red
    • Town: London, UK
    • Country: gb
    Re: Ventureshield
    Reply #2 on: May 15, 2021, 02:11:50 pm
    May 15, 2021, 02:11:50 pm
    Invisible paterrns , me and my bike are meeting Monday.

    many thanks

  • Offline norskman   gb

    • XR Member  ‐    72
    • **
    • Topic Author
    • #3

    Offline norskman

    • XR Member
    • **
    • Topic Author
    • Posts: 72
    • Bike: BMW S1000XR Red
    • Town: London, UK
    • Country: gb
    Re: Ventureshield Invisible Patterns
    Reply #3 on: May 17, 2021, 08:50:16 pm
    May 17, 2021, 08:50:16 pm
    Just returned from Invisible Patterns.
    They supplied and fitted Protective Film to my bike.

    The job was excellent. You cannot even see where it has been fitted!
    I highly recommend them.

    its really not worth trying to fit it yourself, unless you know what you are doing.
    Leave it to the professionals.

    Ask for Russell - he will sort you out, they can pretty well do any bike.