Author Help me out - Can Bus port for Hex Ezcan  (Read 2756 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Spiceboy   gb

    • XR Pro  ‐    205
    • ***
    • Topic Author

    Offline Spiceboy

    • XR Pro
    • ***
    • Topic Author
    • Posts: 205
    • Bike: XR TE M'Sport
    • Town: Bury St Edmunds
    • Country: gb
    Help me out - Can Bus port for Hex Ezcan
    on: June 10, 2021, 09:52:32 am
    June 10, 2021, 09:52:32 am
    I'm about to fit a pair of Denali lights using the Hex Ezcan onto my Gen 2 K69 but can't find anywhere online where the Canbus interface port is located for me to plug into.  A couple of pics showing it's location would really help, many thanks in anticipation. :034: :028:
    Cheers,
    Charlie Spiceboy.

  • Offline bazzer   gb

    • XR God  ‐    1193
    • *****
      #1

    Offline bazzer

    • XR God
    • *****
    • Posts: 1193
    • Town: Waterlooville
    • Country: gb
    Re: Help me out - Can Bus port for Hex Ezcan
    Reply #1 on: June 10, 2021, 05:38:45 pm
    June 10, 2021, 05:38:45 pm
    The Alarm connector is what the Clearwater CANopener plugs into, so I reckon its probably there.


  • Offline advr6   ca

    • XR Pro  ‐    107
    • ***
      #2

    Offline advr6

    • XR Pro
    • ***
    • Posts: 107
    • Bike: S1000XR
    • Town: Burlington
    • Country: ca

  • Offline the bartender   ca

    • XR Pro  ‐    151
    • ***
      #3

    Offline the bartender

    • XR Pro
    • ***
    • Posts: 151
    • Town: Vancouver
    • Country: ca
    Re: Help me out - Can Bus port for Hex Ezcan
    Reply #3 on: June 11, 2021, 04:36:52 pm
    June 11, 2021, 04:36:52 pm
    i used the alarm connector port

  • Offline BNAHOSS   us

    • XR Member  ‐    56
    • **
      #4

    Offline BNAHOSS

    • XR Member
    • **
    • Posts: 56
    • Bike: ‘21 XR
    • Town: Nashville, TN
    • Country: us
    Re: Help me out - Can Bus port for Hex Ezcan
    Reply #4 on: June 17, 2021, 03:28:55 am
    June 17, 2021, 03:28:55 am
    *Originally Posted by Spiceboy [+]
    I'm about to fit a pair of Denali lights using the Hex Ezcan onto my Gen 2 K69 but can't find anywhere online where the Canbus interface port is located for me to plug into.  A couple of pics showing it's location would really help, many thanks in anticipation. :034: :028:

    Aft of the battery, no alarm will be an acre of empty space with one capped connector clipped to the side.

    That’s your connection point.
    stupidity has a knack of getting its way ~ Albert Camus

     



    dysfunctional