Author Gen 1 HP rearset installation and spacer sizes.  (Read 644 times)

0 Members and 1 Guest are viewing this topic.

  • Offline bazzer   gb

    • XR God  ‐    1168
    • *****
    • Topic Author

    Offline bazzer

    • XR God
    • *****
    • Topic Author
    • Posts: 1168
    • Town: Waterlooville
    • Country: gb
    Gen 1 HP rearset installation and spacer sizes.
    on: June 10, 2021, 05:42:35 pm
    June 10, 2021, 05:42:35 pm
    Hi guys

    I have just gone to install a second hand set of HP rearsets on my gen 1 and I am a bit concerned about the spacers that go on the main mounting bolts.

    The instructions say on the brake side there is a small and a large spacer, I have 3 small ones all the same size.  Can anyone confirm I am missing a larger width spacer?

    If anyone has them fitted to their bike I would appreciate a pic of the spacers that sit behind the main rearset body that the main mounting bolts go through.

    Cheers

    Bazzer

     



    dysfunctional