Author Topic: Engine mounting bolts.  (Read 220 times)

0 Members and 1 Guest are viewing this topic.

Offline Triumphboy

  • XR Member
  • **
  • Topic Author
  • Posts: 31
  • Bike: S1000XR SE
  • Town: Buckingham
  • Country: gb
Engine mounting bolts.
on: September 13, 2021, 02:38:36 PM
Hello.
Could anyone tell me how many engine mount bolts there are between the engine and frame please. I can see four at the head and I think there are 2 at the back of the engine.
I have all of the torque settings and procedure but just wanted to check with anyone that knows if there are any more than the six I've found.
I want to retighten them because I'm getting a bit more vibration than I used to. (I think)  :001:
Gen 1 btw!

Many thanks for any help!

#1

Online Antares

  • XR Pro
  • ***
  • Posts: 374
  • Bike: 2015 XR Sport SE
  • Town: Staines/Kirklees
  • Country: gb
Re: Engine mounting bolts.
Reply #1 on: September 13, 2021, 04:11:33 PM
*Originally Posted by Triumphboy [+]
Hello.
Could anyone tell me how many engine mount bolts there are between the engine and frame please. I can see four at the head and I think there are 2 at the back of the engine.
I have all of the torque settings and procedure but just wanted to check with anyone that knows if there are any more than the six I've found.
I want to retighten them because I'm getting a bit more vibration than I used to. (I think)  :001:
Gen 1 btw!

Many thanks for any help!

There are 1 above and 1 below the swingarm pivot, both sides, one just above the back of the shark fins on either side and one about midway down behind the sharkfins near the coolant reservoir on both sides. 8 in total

#2

Offline Triumphboy

  • XR Member
  • **
  • Topic Author
  • Posts: 31
  • Bike: S1000XR SE
  • Town: Buckingham
  • Country: gb
Re: Engine mounting bolts.
Reply #2 on: September 13, 2021, 05:15:52 PM
Many thanks Antares.
Very much appreciated.
 :062:

 



dysfunctional