Author Topic: 2016 long belly pan  (Read 448 times)

0 Members and 1 Guest are viewing this topic.

Offline Amcw

  • XR Junior
  • *
  • Topic Author
  • Posts: 2
  • Bike: 2016 s1000xr
  • Town: USK
  • Country: gb
2016 long belly pan
on: November 14, 2021, 11:16:12 PM
Hi all, looking to fit one of these but don't want to pay the £600 that I have seen them for on the Web. Anyone know of a cheaper option?

#1

Offline lospsi

  • XR Member
  • **
  • Posts: 60
  • Bike: BMW S1000XR 2015
  • Town: Athens
  • Country: gr
Re: 2016 long belly pan
Reply #1 on: November 15, 2021, 09:19:04 AM
Might be a longshot but the guys at s1000r forum had similar thoughts and sharkskinz finally produced a cheaper fiberglass bellypan. Haven't watched lately the updates but my guess is that with a bit of fiddling, it might fit the XR too.
https://www.s1000r.co.uk/index.php/topic,7084.msg90854.html#msg90854
(it's a long thread :002:)

here's the link to the actual product
https://ionemoto.com/collections/bmw-s1000r/products/9031?variant=29562698924143

#2

Offline Antares

  • XR Master
  • ****
  • Posts: 564
  • Bike: 2015 XR Sport SE
  • Town: Staines/Kirklees
  • Country: gb
Re: 2016 long belly pan
Reply #2 on: November 15, 2021, 10:01:57 AM
That looks decent if it fits the oem belly pan is only held on by 2 bolts and 2 plastic rivets so it can't be too complicated to fab up a good fit assuming the bottom of the single R side fairings and engine position is the same as the XR is

#3

Offline Amcw

  • XR Junior
  • *
  • Topic Author
  • Posts: 2
  • Bike: 2016 s1000xr
  • Town: USK
  • Country: gb
Re: 2016 long belly pan
Reply #3 on: November 16, 2021, 12:51:59 PM
Looks decent enough indeed, many thanks for the link.
I'll ping them a mail and see if they can help with the XR
Am assuming will have to remove the centre stand to fit this?