Author Parts for repair  (Read 1195 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Antares   gb

    • XR God  ‐    1087
    • *****
    • Topic Author

    Offline Antares

    • XR God
    • *****
    • Topic Author
    • Posts: 1087
    • Bike: 2015 XR Sport SE
    • Town: Staines/Kirklees
    • Country: gb
    Parts for repair
    on: December 01, 2021, 03:49:16 pm
    December 01, 2021, 03:49:16 pm
    Hi, just curious if anyone has any of the following parts lying around:

    Rear passenger footrest (left hand side)
    Red Painted left upper cowl triangly thingy (the one with the shark fins)
    Left hand handguard
    Engine mount bolts from when you fitted engine bars or crash bungs
    Gear lever (apparently lot of people replace it with HP or SW motech ones)

    Cheers!

  • Offline RyanGTXR   gb

    • XR Pro  ‐    330
    • ***
      #1

    Offline RyanGTXR

    • XR Pro
    • ***
    • Posts: 330
    • Bike: KTM 1290 GT
    • Town: Notts
    • Country: gb
    Re: Parts for repair
    Reply #1 on: December 01, 2021, 04:46:31 pm
    December 01, 2021, 04:46:31 pm
    Just a heads up, if it's gone down hard enough to bend/damage the pillion footrest hangar, check the subframe where it attaches. It can pull the mounting points and the new footrest hangar will sit slightly wrong and be a weak point. Only way to fix is another subframe.
    Also if just main part of handguard (the guard itsself), it's same as GS so plenty cheap ones on ebay

  • Offline Antares   gb

    • XR God  ‐    1087
    • *****
    • Topic Author
    • #2

    Offline Antares

    • XR God
    • *****
    • Topic Author
    • Posts: 1087
    • Bike: 2015 XR Sport SE
    • Town: Staines/Kirklees
    • Country: gb
    Re: Parts for repair
    Reply #2 on: December 01, 2021, 04:50:07 pm
    December 01, 2021, 04:50:07 pm
    *Originally Posted by RyanGTXR [+]
    Just a heads up, if it's gone down hard enough to bend/damage the pillion footrest hangar, check the subframe where it attaches. It can pull the mounting points and the new footrest hangar will sit slightly wrong and be a weak point. Only way to fix is another subframe.
    Also if just main part of handguard (the guard itsself), it's same as GS so plenty cheap ones on ebay

    Cheers for the heads up, with regards to the handguard I found a bunch on ebay but all damaged or asking for brand new OEM price, I was hoping someone just has some laying around they took off and forgot about.
    As for the subframe, all checked, the hanger didn't bend at all just scratched the end and tore up the rubber on the footrest a bit, I might just replace the actual footrest itself, not the hanger, but people probably have the whole hanger lying around.

  • Offline RyanGTXR   gb

    • XR Pro  ‐    330
    • ***
      #3

    Offline RyanGTXR

    • XR Pro
    • ***
    • Posts: 330
    • Bike: KTM 1290 GT
    • Town: Notts
    • Country: gb
    Re: Parts for repair
    Reply #3 on: December 01, 2021, 11:11:07 pm
    December 01, 2021, 11:11:07 pm
    I may have a couple of the footrests only, (no hanger) can look tomorrow eve after work if you like

    edit - think mine were from the r/h/s. Will have to research if they are interchangable
    Last Edit: December 01, 2021, 11:12:55 pm by RyanGTXR