Author My Gen 1 Tail Tidy/ Fender Eliminator  (Read 591 times)

0 Members and 1 Guest are viewing this topic.

  • Offline adamkhan   us

    • XR Member  ‐    75
    • **
    • Topic Author

    Offline adamkhan

    • XR Member
    • **
    • Topic Author
    • Posts: 75
    • Bike: 2016 BMW S1000XR
    • Town: Sanger
    • Country: us
    My Gen 1 Tail Tidy/ Fender Eliminator
    on: November 10, 2022, 04:31:35 am
    November 10, 2022, 04:31:35 am
    I did a custom tail tidy on my 2016 with an R&G kit and a S1000RR kit off Ali Express. Only drawback is the S1000RR kit tail light & brakelight turn off wen the turn signals are activated leaving no brake light warning for vehicles behind so I left the turn signals disconnected & installed another flex light bar with added tail, brake & turn signals. These Turn Signals work but they don't draw enough current so my dash indicators don't turn on and I have a lamp light. Look way better & cleaner. I still need to install the Lic plate light and maybe some resistors so the dash indicators work & the Lamp fault is gone.




  • Offline adamkhan   us

    • XR Member  ‐    75
    • **
    • Topic Author
    • #1

    Offline adamkhan

    • XR Member
    • **
    • Topic Author
    • Posts: 75
    • Bike: 2016 BMW S1000XR
    • Town: Sanger
    • Country: us
    Re: My Gen 1 Tail Tidy/ Fender Eliminator
    Reply #1 on: November 10, 2022, 04:38:32 am
    November 10, 2022, 04:38:32 am
    The upper lightstrip is red but shows amber in the pics. It's integrated with taillight, brake light & turnsignals.


    Last Edit: November 10, 2022, 04:45:36 am by adamkhan

  • Offline Nik@s   gr

    • XR Junior  ‐    5
    • *
      #2

    Offline Nik@s

    • XR Junior
    • *
    • Posts: 5
    • Bike: S1000XR
    • Town: PATRA
    • Country: gr
    Re: My Gen 1 Tail Tidy/ Fender Eliminator
    Reply #2 on: March 04, 2023, 09:22:01 pm
    March 04, 2023, 09:22:01 pm
    Which tail is this on the xr.

     



    dysfunctional