1   Go Down

Author lowering a 21 Gen 2  (Read 380 times)

0 Members and 1 Guest are viewing this topic.

    • Offline Arthurgee   gb

    • XR Member  ‐    27
    • **
    • Topic Author

    Offline Arthurgee

    • XR Member
    • **
    • Topic Author
    • Posts: 27
    • Bike: 1000XR
    • Town: Perth
    • Country: gb
    lowering a 21 Gen 2
    on: February 06, 2023, 02:36:35 pm
    February 06, 2023, 02:36:35 pm
    So i found out today that i cant use a soupeys lowering linkage for the Gen 2 because it doesn't use the same linkage as the Gen1. Glad i didn't go ahead and buy one without doing some homework first. So my question is to the more knowledgeable of you, apart from go and buy a lower framed one, which is not going to happen now, what else can i do to lower the bike ride height. Even with the suspension on min, its still to high, and that with a lowered modified seat, so tried all the options so far that i can think of. Is the only option left a hypero rear spring? #TIA
    G
    Last Edit: February 06, 2023, 02:37:42 pm by Arthurgee
    1   Go Up
     


    Recent Topics