Author Denali T3s on Gen2  (Read 588 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Davemc   gb

    • XR Junior  ‐    3
    • *
    • Topic Author

    Offline Davemc

    • XR Junior
    • *
    • Topic Author
    • Posts: 3
    • Bike: S1000XR
    • Town: Sevenoaks
    • Country: gb
    Denali T3s on Gen2
    on: March 30, 2023, 09:04:32 am
    March 30, 2023, 09:04:32 am
    Anyone know if I can tap the Denali T3 rears indicator wires into the BMW indicator wires without throwing a canbus error.  I'll wire the brake light wires to Hex Ezcan brake light circuit.  Trying to see if I can save 2 circuits on Hex by taping the indicatopr circuit.

  • Offline Hamma996   kw

    • XR Junior  ‐    12
    • *
      #1

    Offline Hamma996

    • XR Junior
    • *
    • Posts: 12
    • Bike: S1000xr
    • Town: Kuwait
    • Country: kw
    Re: Denali T3s on Gen2
    Reply #1 on: April 07, 2023, 08:22:41 pm
    April 07, 2023, 08:22:41 pm
    Unfortunately it will cause a code
    I was in similar position so I had to buy 2nd hex unit

  • Offline Davemc   gb

    • XR Junior  ‐    3
    • *
    • Topic Author
    • #2

    Offline Davemc

    • XR Junior
    • *
    • Topic Author
    • Posts: 3
    • Bike: S1000XR
    • Town: Sevenoaks
    • Country: gb
    Re: Denali T3s on Gen2
    Reply #2 on: April 07, 2023, 08:40:45 pm
    April 07, 2023, 08:40:45 pm
    Tx

    Went ahead and wired to Hex today - what a pain 3 circuits used for 2 tail T3s. At least I now have indicators that people can see.
    Last Edit: April 07, 2023, 08:50:17 pm by Davemc