Author Free 1Jac lift Gen 1  (Read 2891 times)

0 Members and 1 Guest are viewing this topic.

  • Offline grizzle   gb

    • XR Pro  ‐    336
    • ***
    • Topic Author

    Offline grizzle

    • XR Pro
    • ***
    • Topic Author
    • Posts: 336
    • Bike: Gone to a GS
    • Town: North Wales
    • Country: gb
    Free 1Jac lift Gen 1
    on: May 17, 2023, 07:55:28 pm
    May 17, 2023, 07:55:28 pm
    I have a 1Jac bike lift that will get the bike totally off the ground and has wheels that can move it around on a smooth surface. Wheels are lockable. Great for Wheel changes and storage
    Free to a good home (or a donation to RNLI), just needs collecting from near Wrexham
    It is a sturdy stand and great at what it does. Unfortunately 1Jac went out of business a couple of years ago, then restarted and again stopped
    I have had 2 GS's since the XR and as I couldn't get an adapter to fit I bought a Bursig stand for the GS. Very similar.
    Bad news...i cannot find the spigot that goes on one of the engine bolts to lift the bike. Everything else is there, adapter plate, wheels and it is in v good condition
    Pics below
    Spigot as shown in pic of bike outside, next one up from swing arm pivot, and me holding it to camera (before I put is somewhere really safe)
    Also a pic of how I used to take both wheels off at the same time and why I bought the bike lift
    These were £300 + at the time but I am never going to use it again and it is limited to the Gen 1 XR, almost (spigot aside)
    I don't get on here much check over the next few days







  • Offline grizzle   gb

    • XR Pro  ‐    336
    • ***
    • Topic Author
    • #1

    Offline grizzle

    • XR Pro
    • ***
    • Topic Author
    • Posts: 336
    • Bike: Gone to a GS
    • Town: North Wales
    • Country: gb
    Re: Free 1Jac lift Gen 1
    Reply #1 on: June 01, 2023, 06:48:50 am
    June 01, 2023, 06:48:50 am
    Now claimed
    Thanks