Author Auxiliary light oem gen2  (Read 1486 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Aj   england

    • XR Junior  ‐    1
    • *
    • Topic Author

    Offline Aj

    • XR Junior
    • *
    • Topic Author
    • Posts: 1
    • Bike: BMW xr 2020 gen2
    • Town: Sheffield
    • Country: england
    Auxiliary light oem gen2
    on: June 24, 2023, 12:26:05 am
    June 24, 2023, 12:26:05 am
    Hi to all.   I am new to this forum. I hope I am posting in the right place in regards to my problem.

    I have the 2020 xr te model with the oem auxiliary lights fitted with the evotech crash bungs and brackets. The auxiliary light got condensation build up then after a while the light stopped working.  so having time on my hand I opened the sealed unit with great difficulty cleaned it all out put it all back together again to find I still didn't work. So the warranty was void so I payed around £115 for a new one fitted that one and after doing around 1k miles got the same problem so I taken it back to BMW and they exchange it no questions asked.  Now I have the same problem again. I dont want to keep going back to BMW for it to happen again.   So I was thing of taking the front black cover off exposing the plastic clear lens and drilling a 2mm hole on the bottom and one at the top so the condensation has somewhere to escape too.   Any suggestions would be appreciated befor I do this.