Author Topic: Exhaust Valve and Servo (Read 2159 times)

Svenski · « **on:** December 01, 2016, 12:11:32 PM »

Hi one and all i'm looking at fitting the Akrapovic Headers with my standard can. My question is can i do the same as i did on my twin cam GSA and remove both the valve and servo from my bike with no fault lights on the dash but only when plugged to computer it displays the fault.

Thanks Brethren

Svenski

Winger · « **Reply #1 on:** December 01, 2016, 05:53:06 PM »

You leave the servo in situ and just take the cables off,but make sure you read the Akrapovic info first as you'll need a third party fuelling option,I have a set of headers and their still not fitted because I'm not happy with the info I'm currently getting which included a lengthy conversation with the Dynojet guys.

Svenski · « **Reply #2 on:** December 01, 2016, 06:14:44 PM »

Cheers Winger

The mapping gate has a very two-sided issue some guys remap and some haven't

I will be contact hilltop once installed.

Winger · « **Reply #3 on:** December 01, 2016, 07:24:42 PM »

Not two sided at all it's either Rexxer/Bren Tuning or a PC there is already plenty about the individual that I can't even bring myself to mention.

RichS1000XR · « **Reply #4 on:** December 02, 2016, 09:40:20 AM »

Originally Posted by Svenski

Cheers Winger

The mapping gate has a very two-sided issue some guys remap and some haven't

I will be contact hilltop once installed.

Oh god, don't mention Hilltop to Whinger, he'll go into meltdown.

Winger · « **Reply #5 on:** December 02, 2016, 10:15:22 AM »

Not half as quick as your motor will